Johannus D-470, Руководство пользователя, Страница: 22 / 44

User Manual Ecclesia T-270 / T-370 / D-470 / D-570 22
The settings to sent are: the content of all capture memory locations and all settings which can
be set via the Johannus Menu, except Key Volumes. Key Volume settings are a part of the
intonation data. These data can be received with the optional Johannus Intonat software.
a. Sending data from the organ
1. Press the MENU-piston.
2. Use the - and + pistons to select the
Datadump
function on the display.
3. Press the SET piston. The
Press SET to send data
text appears on
the display.
4. Make sure the desired storage medium, the Johannus Se for
example, is properly connected.
5. Press the SET piston. When data is being sent,
Sending data
appears on
the display. Sending data will take some time.
6. If the data dump is complete, the main menu appears on the display.
7. Press the MENU piston to exit the Johannus Menu.
b. Uploading data to the organ
1. Make sure the storage medium, the Johannus Se for example, with
a previous recorded data file is properly connected.
2. Start sending the data file on the sequencer. A message that a data file is
being received appears on the display of the organ.
3. When the upload is completed the main screen of the display appears
automatically.
5.3 Expression Pedals
The organ is equipped with PEPC™ (Programmable Expression Pedal Configuration). This
function makes it possible to configure each expression pedal to one’s own discretion.
We distinguish two types of expression pedals:
Swell pedal: dynamics by increase or decrease of volume. In a pipe organ
this is achieved by closing or opening the swell shutters of a
swell box. See also § 4.2 Expression pedal.
Crescendo pedal: dynamics by increase or decrease the amount of stops. See
also § 4.10 Crescendo pedal.
Do not use the organ when the
Sending data
text is on the display.
Receiving a data file has no relation to the Johannus Menu and can be done
on every moment the organ is switched on, except when playing a Demo
Song.
Make sure to upload only data files which are recorded from the
instrument concerned. Uploading a data file from another instrument may
jeopardize the functioning of your instrument.