Johannus D-470, Руководство пользователя

Страница: 17 / 44

User Manual Ecclesia T-270 / T-370 / D-470 / D-570 17
RO: Reeds Off
Reeds Off is a function to switch off all reed stops simultaneously. As long as this
piston is pressed, no reed stops can be activated. When this function is switched
off, the reed stops that were on are activated again. Activate the Reeds Off with
the RO piston.
4.8 Capture memory
4.8.1 Pre-programmed memory locations
Pre-programmed memory locations are available by operating pistons PP to T.
These six memory locations have factory settings (presets) appropriate for the
quiet pianissimo to the loud tutti.
Calling up a pre-programmed memory location:
Press a pre-programmed memory location (PP-T). The active stops light up.
Programming a pre-programmed memory location:
1. Select the desired stops.
2. Press the SET piston. Hold in the piston.
3. Press the desired pre-programmed memory location (PP-T).
4. Release the SET piston.
4.8.2 Capture memory locations
Through use of the capture memory, a registration can be activated with just one
piston. The capture memory consists of 250 levels.
These levels can be seen on the display (
Mem:…
). Each level has eight general
memory locations (general pistons 1-8) and 8 separate memory locations per
division (divisional pistons 1-8).
Although it is possible to store any registration under a piston of a pre-
programmed memory location it is advisable to select a registration matching the
text of the piston.
The current setting of the pre-programmed memory location will be lost.
The Ecclesia T-270 only has one pre-programmed memory location: the Tutti (T)
piston.
The Ecclesia T-270 has six general memory locations (general pistons 1-6) and 6
separate memory locations per divisional (divisional pistons 1-6) per level.