6
Joerns® Bed Frames
Chauffeur™
© 2016 Joerns Healthcare • 6110347 RevA • 16-2857
Operation
Warning: Possible Injury or Death.
Whenever using
a Chauffeur and a Joerns bed as a transport device,
Joerns recommends using two people, one to operate
the Chauffeur on the side near the head end to
interface with the bed occupant and the second near
the foot end to visualize obstacles during transport.
Improper operation could result in property damage,
injury or death.
Warning: Possible Injury or Death.
Whenever
moving a Joerns bed with the Chauffeur, be extremely
cautious and deliberate with your movements using an
appropriate speed for the environment. Failure to do
so could result in property damage, injury or death.
Warning: Possible Injury or Death.
The Chauffeur
is designed to move the Joerns bed on ADA approved
1:20 sloped surfaces. Using the Chauffeur on a sloped
surface steeper than the ADA requirements may result
in loss of control of the Chauffeur and the Joerns bed.
Warning: Possible Injury or Death.
The casters
should be unlocked prior to moving the bed with the
Chauffeur. This improves the maneuverability of the
bed.
To operate the Joerns Chauffeur
1. Lower the bed to prepare for transport. Make sure
all cords are disconnected and properly stored.
Unlock all casters. Make sure the area is flat, firm,
smooth, open and free of obstacles.
2. Press the Power Button until the lights illuminate
on the Chauffeur control handle.
3.
Pay attention to the Battery Status Indicator on the
Chauffeur control handle. For more information
on the Battery Status Indicator, please see the
“Battery Status Indicator” section.
4.
Select the desired direction based on model,
4-way or 2-way. See the “Control Handle” section.
5. Select the desired speed (FAST/SLOW) using the
speed control buttons.
6. Gently press either drive button at the top of the
Chauffeur control handle. The Chauffeur will start
to move and accelerate in the direction selected.
7. To stop, release the Chauffeur drive buttons to
disengage the Chauffeur drive. The Chauffeur will
come to a controlled stop.
8.
To change direction, select directional arrows.
Allow a moment for the Chauffeur to adjust to
the new direction. The LED light will stop flashing
when ready. Gently press the drive button to
engage. Always adjust the speed appropriately for
safe operation.
Note:
The Joerns Chauffeur is designed to change
direction with a flashing LED. The Chauffeur is ready
to engage when the LED is solid yellow.
For your first drive, we recommend the following:
When possible, always work with your Joerns
representative to learn how to use your bed and
accessories. If you have any questions concerning the
Chauffeur or a Joerns bed please call Joerns customer
care at 1-800-826-0270.
1.
Make sure the area is flat, firm, smooth, open and
free of obstacles.
2. All the bed casters must be unlocked for the
Chauffeur to function properly. The drive wheel will
perform the driving and braking functions.
3. Adjust the control handle to a comfortable height
at or near low height.
4. Depress the POWER switch to turn the power ON.
5. Depress the SPEED switch to ensure the unit is
in its SLOW speed setting. Secure all AC power
cords.
6. Select the desired direction. Press either of the
green drive buttons at the top of the control handle
to engage the Chauffeur drive.
7.
Steer the bed in different directions to get a feel for
how the device maneuvers.
8.
Depress the speed button to adjust the unit’s
variable speed. Remember, power compensation
will automatically give you more power and allow
you to keep a slower speed should you need it.
9. Release the green drive button to stop the device.
Take note of how the braking feels as the bed
comes to a stop.
10. Push the direction button to the rear to go
backward. The reverse direction will be at a slower
speed as compared to the forward direction.
Always make sure the area is clear behind you
before backing up.
11. Push the direction button to the left / right to
engage the SideShift™. The SideShift direction
will be at a slower speed. Always make sure the
area is clear before repositioning the bed to each
side.
12. Remember to turn the power button OFF (no
visible lights on the Battery Status Indicator) when
not driving or transferring a patient. Engage the
caster locks when the bed is unattended.
Speed controller characteristics are pre-set for the
average driver in a close quarters setting.
