Arise LAL
®
Mattress and Overlay
Twenty (80") or twenty one (84") individual
therapy cells help to evenly distribute the
patient’s weight and maximize pressure relief.
Modular cell design mattress for ease of
cleaning, re-assembly and cost effective service.
Lower two-inch support cell provides support in
the event of a power failure.
6.5" deep mattress therapy cells and 5" deep
overlay therapy cells are constructed of highly
durable, polyurethane coated nylon to provide
adequate support and prevent bottoming out for
most patients within weight limit.
Integrated low-pressure heel section provides
lower interface pressures
Durable base tub is constructed from 100%
heavy weight 1680 denier nylon with a 1.5
oz. urethane coating and incorporates bed
attachment loops for stability.
Maximum weight capacity: Up to 500 lbs. based
on model*
Anti-kink, easy clean air supply hose set
Integrated CairRails risk management side
both sides of the patient along the mattress edge
to provide additional support and to provide a
gentle reminder to the patient that they are near
the edge of the mattress. Constructed with lower
ingress/egress area.
Arise LAL 1000 Mattress
Twenty individual therapy cells help to evenly
distribute the patient’s weight and maximize
pressure relief. Modular cell design mattress
for ease of cleaning, re-assembly and cost
effective service.
Lower two-inch therapy support cell provides
additional therapeutic support and remains
power failure.
6.5" deep therapy cells are constructed of highly
durable, polyurethane coated nylon to provide
adequate support and prevent “bottoming out”
for most patients within weight limit.
Integrated low-pressure heel section provides
lower interface pressures
Durable base tub is constructed from 100%
heavy weight 1680 denier nylon with a 1.5
oz. urethane coating and incorporates bed
attachment loops for stability.
Maximum weight capacity: 1000 lbs.*
patient’s weight and body shape.
Anti-kink, easy clean air supply hose set
Integrated CairRails risk management side
both sides of the patient along the mattress
edge to provide additional support and to
provide a gentle reminder to the patient
that they are near the edge of the mattress.
Constructed with lower ingress/egress area.
Arise LAL 1000 EX Mattress
Caregiver operated mattress control panel to
adjust the following mattress features:
-
of the 6” wide side bolsters (left and right)
when used in combination with the Joerns
Bari10A bed (36, 42 or 48 inches wide)
allows for close-in nursing procedures that
may other wise be a strain on the care
giver and transportation through
narrow doorways.
-
-
extension cells which in combination with
the Joerns
®
Bari10A bed allow the bed and
mattress to extend from 80 to 88 inches
in length.
Sixteen (Eight paired) individual therapy cells
help to evenly distribute the patient’s weight
and maximize pressure relief. Modular cell
design mattress for ease of cleaning,
re-assembly and cost effective service.
Lower three-inch foam support cell provides
additional therapeutic support and remains
supportive in the event of a power failure or for
patient transport.
Five-inch deep therapy cells are constructed
of highly durable, polyurethane coated nylon
to provide adequate support and prevent
bottoming out for most patients within the
weight limit.
Maximum weight capacity: 1000 lbs.*
* Mattress weight capacity only; total weight must not
Electronic Copy: Reference Only
Notice: Document considered current at time of printing. Verify revision before use.
