Joe Due Z10, Руководство по эксплуатации

Страница: 11 / 37

11 / 37
OperatingManualZ10/Z20/Z30
4) Dust collecting and bagging
The machineis equipped with a continuous fold bag system for an effective dust collecting and
bagging. The supplied fold bag is a 22 m long plastic tube that will be divided into individual
bags using the zip ties attached with the machine.
To assemble a new fold bag:
1)
Release the beltholding the last bag and take off the bag holder.
2) Put in a new fold bag & pull out the inner end upwards.
3) Assemble the holder onto the machine and strap the opening facing upwards with the
belt.
4) Pull down the outside end and close it using a zip tie.
Before changing a fold bag or a regular bag, make sure the filter cleaning cycle has been
completed.
13. Filter change
Unhealthy dust can be spread during filter change. Accordingly, the user should wear
protective glasses, protective gloves, and a breathing mask conforming to protection class
FFP3.
WARNING! Remember to switch off the machine and pull the plug out of the outlet before
servicing.
Change of pre-filter
1) Loosen the 3 hooks and remove the top cover. Take out a new filter from its bag. Lift out the
used filter from its chamber and place it gently into the filter bag. This bag must be closed
and diposed properly.
2) Insert a new filter.
3) Put back the top head and close the 3 hooks properly.
IMPORTANT! If you are removing the pre-filter in order to clean it. Hitting the filter with force or use
of compressed air will destroy the filter. It can handle water, but high pressure water cleaning
will destroy it.
Change of HEPAfilter
1) Loosen the 2 nuts on each filter cover. Take out a new filter from its bag.Lift out the used
HEPA filter from its chamber and place it gently into the filter bag. This bag must be closed
and diposed properly.
2) Insert a new filter to the filter chamber.
3) Put back the filter coverand close the 2 nuts properly.
IMPORTANT! HEPA filters can’t be cleaned, trying this might destroy it. When installing the
replacement filter, make sure not touch the inside of the filter. Any kind of force/damage on the
inside of filter media will destroy the new filter.