4. Check whether the cabinet connecting block card ditch close to the outer edge coincides with the
cabinet, if there are problems, you shall adjust the adjustable foot, by using a screwdriver insert the
adjustable foot gap, turning left and right.
5. Use two pieces of ST4*12 screws fixing the freezer’s left and right foot with the cabinet.
6. Fix two ST4*12 screws in the connection of the door.
7.
Tighten the connection by turning the screw
8. Push a plastic cover into the fillister.
9. Push another plastic cover into the fillister to cover the top hinge.
10. Install the bottom baffle between both fixed foot of the freezer in order to cover the 22mm gap.
-22-
Adjustable leg can change the unit height
Two screws fixed with the cabinet
Assemble hinge cover
