6. Insert the smooth side of the connector plug into
the smooth side of the V-12M socket.
7. Locate the 2-pin 12V connector.
8. Insert each 12V wire into the appropriate hole
on the connector.
See figure 6.
9. Use a small flathead
screwdriver to tighten
the screws in place.
10. Install the V-12M into
the device ring.
11. Set the Impedance
Magnification Switch as
determined by the impedance charts.
12. Set the switches, on all of the controls, to the
same position (1x, 2x, 4x, or 8x).
13. Attach the cover plate.
See installation diagram.
INSTALLATION DIAGRAM
Speakers
Stereo Receiver
V-12M
V-12M
Side View
Output to
Speakers
Input From
Amplifier
V-T4M
12V DC Power Supply Plugged
into an Unswitched AC Outlet
5
Figure 6
