up to 4 GPM at 4000 PSI. This unit will not spin efficiently with pressure under
2.3 GPM. Periodically check the tips to ensure they are not plugged by dirt
particles. It is very important when operating your 14” rotary surface cleaner,
that you maintain a continuous motion.
Should you leave the cleaner in a stationary position, the surface being cleaned
can be seriously damaged by the high pressure.
Recommended Applications
use with a gun and lance
Connect to lance using q/c fittings on the lance and 14” rotary surface cleaner.
Attach to long wand
Attach to a long wand for cleaning hard to reach surfaces.
Connect to long wand using the QC fittings on the long wand and 14” rotary
surface cleaner.
TROUBLESHOOTING
Problem
Cause
Solution
Rotary arm not
spinning
• 1 or more plugged
nozzles • Nozzles not
aligned with arm •
Damaged nozzle or
rotary arm
• Clean or replace
nozzles • Realign
nozzles • Replace
damaged part(s)
Leaking water from
weep hole
• Damaged or worn seals • Replace rotary head
Leaking water from
QC plug
• Damaged or missing
o-ring in coupler
• Replace o-ring
Unit vibrating while
in use
• One or more plugged
nozzles • Uneven nozzle
ware • Damaged nozzle
or rotary arm
• Miss matched nozzles
• Clean nozzles
• Replace damaged
part(s) • Replace nozzles
Содержание CT5777
Страница 2: ......
Страница 6: ...PARTS DIAGRAM A 85 792 037 brush skirt B 85 790 037 rotary head C 85 791 037 rotary arm...
Страница 7: ......
Страница 8: ...CANNON TOOLS LTD Add 20 station road Rowley Regis west midlands B65 0JU U K Made in China...