9
3. When the saw shaft fixed, tum the wrench counterclockwise to remove bolt and
washer.
4. While qrlpping the safety cover knod, retract the safety cover into the saw cover
and take out the saw blade.
*MOUNTLNG THE SAW BLADE
1. Install the saw blade in the reverse order to removal.
2. Wipe off the swart from the spindle, washer, etc.
3. The saw blade should be installed so that the arrow in the saw blade is aligned
with the anow on the saw cover.
4. Tighten the bolt securely.
CAUTIONS
：
If a wrench other than the one supplied is used. The bolt cannot be tightened
correctly. Always use the supplied wrench before connecting the power plug, check
that if lock lever is retumed to its original position and the saw blade rotates
smoothly.
5.
MAINTENANCE AND INSPECTION
：
*INSPECTION TIHE SAW BLADE
Since use of dull saw blade will cause motor maltunctioning and degraded efficiently,
replace with a new one without delay if abrasion is noted.
*INSPECTING THE MOUNTING SCREWS
Regularly innect all mounting screws and ensure that they are properly tightened.
Should any of the screws be loosened, retighten then immediately. Failure up to so
could result in serious hazard.
*MALNTENANCE OF THE MOTOR
The motor un it winding is the very "heart" of the power tool. Exercise due care to
ensure the winding does not become damaged and wet with oil or water.
*INSPECTTNG THE CARBON BRUSHES
