Jobsite CT0092, Оригинальное руководство

Страница: 14 / 17

TECHNICAL DATA
Technical data CT0092
Mains voltage V 230-240
Mains frequency Hz 50
Power input W 1800
No load speed min
-1
5000
Max. speed rating saw blade min
-1
7000
Saw blade diameter mm 255X30X36T
Blade bore mm 2.8
Laser 2x AAA (1.5V)
Batteries included
Cutting Capacities
0°x 90° 72x300mm
45°x 90° 72x200mm
0° x 45° 40x300mm
45° x 45° 40x200mm
Weight Kg 12.9
Noise emission values measured according to
relevant standard.
Acoustic pressure level
L
PA
95dB(A) K = 3 dB(A)
Acoustic power level
L
WA
108dB(A) K = 3 dB(A)
Weighted root mean square acceleration according
to relevant standard. :
< 2.5 m/s² K=1,5m/s²
The declared vibration total value has
been measured in accordance with a standard
test method and may be used for comparing one
tool with another that the declared vibration
total value may also be used in a preliminary
assessment of exposure.
A warning that the vibration emission
during actual use of the power tool can differ
from the declared total value depending on the
ways in which the tool is used and of the need to
identify safety measures to protect the operator
that are based on an estimation of exposure in
the actual conditions of use (taking account of
all parts of the operating cycle such as the times
when the tool is switched off and when it is
running idle in addition to the trigger time).
CARRYING TOOL
Make sure that the tool is unplugged. Secure the
blade at0° bevel angle and the turn base at the full
right miter angle position.
Lower the handle fully and lock it in the lowered
Position by pushing in the stopper pin.
Carry the tool by holding both sides of the tool base
as shown in the figure. If you remove the holders,
dust bag,etc., you can carry the tool more easily.
CAUTION:
• Always secure all moving portions before carrying
the tool. If portions of the tool move or slide while
being carried loss of control or balance may occur
resulting in personal injury.
STORAGE
_ Thoroughly clean the whole machine and its
accessories.
_ Store it out of the reach of children, in a stable and
secure position, in a cool and dry place, avoid too
high and too low temperatures.
_ Protect it from exposure to direct sunlight. Keep it
in the dark, if possible.
_ Don’t keep it in plastic bags to avoid humidity
build-up.
ENVIRONMENT