Jobsite 7201-S2, Инструкция по эксплуатации

Страница: 7 / 16

4
Wear safety goggles.
Wear ear protection.
Read the instructions for use before
starting the machine.
Always use breathing apparatus when
machining materials which generate
dust.
Wear safety gloves.
End of life machines contain valuable
materials and therefore they should not
be placed in household waste.
We would ask you to play your part in
protecting resources and help protect the
environment by returning this machine
to a return point (if one is available) when
it reaches the end of its life.
The equipment complies with the safety
regulations required for electrical
equipment.
Read through the instructions for use before
starting up the equipment.
Improper use can lead to personal injury and
property damage. Persons, who are not familiar
with the instructions, may not operate the
equipment. Keep the instructions for use in safe
custody.
Children and youths are not permitted to operate
the equipment.
Safety Information
Proper usage
This machine is designed for cutting ferrous
metals commensurate with the size of the
machine.
It is not designed for cutting other other
materials such as wood, stone, bricks, etc.
Use only cutting discs that are suitable for use
with this machine.
Do not use CV, HSS or HM cutting discs or any
other types of cutting discs.
Everybody who operates or services this machine
must be familiar with it and be informed of the
possible dangers it poses.
Do not make any modifications to the machine.
Even if it is used correctly for the purpose for
which it is designed, the construction and type
of the machine means that it will always pose a
certain level of danger.
This includes the following risks:
- Hearing damage if personnel fail to use
approved ear protection
- Danger of workpiece parts being catapulted out
of the machine.
- Danger of recoil by the workpiece of workpiece
parts.
- Harmful dust emissions from workpieces when
the machine is used in enclosed areas.
- Danger of accident caused by hand contact in
the uncovered cutting area of the machine.
- Crush injuries to fingers.
- Danger of cutting disc fracture.
- Danger by defective or broken cutting discs
being catapulted out of the machine.
If it is not used for the purpose for which it is
designed or if any modifications are made to the
machine, the manufacturer cannot accept any
liability.