jobmate YT9108 Скачать руководство пользователя страница 5

This symbol is known as the ‘Crossed-out Wheelie Bin Symbol’. When 
this symbol is marked on a product or battery, it means that it should 
not be disposed of with your general household waste. Some 
chemicals contained within electrical/electronic products or batteries 
can be harmful to health and the environment. Only dispose of 

      

electrical/electronic/battery items in separate collection schemes, 
which cater for the recovery and recycling of materials contained within. 
Your co-operation is vital to ensure the success of   these schemes and 
for the protection of the environment.

1*Petrol lawn mower 
1*Upper handle bar  
1*Lower handle bar  
1*Grass catcher assembly  

Conforms to relevant standards for electromagnetic compatibility.

DESCRIPTION OF SYMBOLS (CONT.)

CONTENTS OF PETROL LAWNMOWER

Keep children at a distance of no less than 5m from the work area.

Do not run the machine over objects. They can be thrown and cause 
severe injury

Very hot surface. Do not touch hot exhaust silencer, gearbox or cylinder.

You may burn yourself. These parts become very hot during operation

and remain very hot during operation and can remain very hot for a long  

period even after the equipment has been switched off. 

Содержание YT9108



















Отзывы: