11
3. Install the whole catcher onto the groove of the back
of the deck. Figure 7.
4. Lower the rear door.
ASSEMBLY INSTRUCTIONS (CONT.)
OPERATION
1. Filling the Engine oil.
1.1 Remove the dipstick (Figure 8.)
tube until the oil level reached the
1.3 Install the dipstick securely.
Attention!
yearly thereafter. Refer to changing the Engineoil .
Attention!
from gasoline can burn you and others.
•
To prevent a static charge from igniting the gasoline, place the container and/or
• Fill the tank outdoors when the engine is cold. Wipe up spills.
• Store gasoline in an approved fuel containe
r, out of the reach of children.
3. Checking the Engine oil level
3.1 Remove the dipstick, wipe it clean,
and fully install the dipstick.
Figure 9.
3.2 Remove the dipstick and check
the oil level (Figure 9). If the oil
level is below the Add mark on the
3.3 Install the dipstick.
Adjusting the cutting height.
Attention!
Adjusting the cutting height may bring you into contact with the
Full line the dipstick. Do not overfill.
dipstick, slowly pour oil into the oil fill
tube to raise the oil level to the Full mark on the dipstick. Do not overfill.