background image

3

e)   Maintain power tools. Check for 

misalignment or binding of moving parts, 

breakage of parts and any other condition 

that may affect the power tool’s operation. 

If damaged, have the power tool repaired 

before use. 

Many accidents are caused by 

poorly maintained power tools. 

f)   Keep cutting tools sharp and clean. 

Properly 

maintained cutting tools with sharp cutting 

edges are less likely to bind and are easier to 

control. 

g)   Use the power tool, accessories and tool bits 

etc. in accordance with these instructions, 

taking into account the working conditions 

and the work to be performed. 

Use of the 

power tool for operations different from those 

intended could result in a hazardous situation.

5)   BATTERY TOOL USE AND CARE

a)   Recharge only with the charger specified by 

the manufacturer. 

A charger that is suitable 

for one type of battery pack may create a risk 

of fire when used with another battery pack.

b)  Use power tools only with specifically 

designated battery packs. 

Use of any other 

battery packs may create a risk of injury and 

fire.

c)   When battery pack is not in use, keep it 

away from other metal objects, like paper 

clips, coins, keys, nails, screws or other 

small metal objects, that can make a 

connection from one terminal to another. 

Shorting the battery terminals together may 

cause burns or a fire.

d)  Under abusive conditions, liquid may be 

ejected from the battery; avoid contact. 

If contact accidentally occurs, flush with 

water. If liquid contacts eyes, additionally 

seek medical help.

 Liquid ejected from the 

battery may cause irritation or burns.

6) SERVICE

a)   Have your power tool serviced by a 

qualified repair person using only identical 

replacement parts.

 This will ensure that the 

safety of the power tool is maintained.

GENERAL SAFETY WARNINGS 

FOR YOUR BATTERY CHARGER

WARNING: Read all safety warnings 
and all instructions.

 Failure to follow the 

warnings and instructions may result in electric 
shock, fire and/or serious injury.

Save all warnings and instructions for future 
reference.

- This appliance is not intended for use by persons 

(including children) with reduced physical, sensory 
or mental capabilities, or lack of experience 
and knowledge, unless they have been given 
supervision or instruction concerning use of the 
appliance by a person responsible for their safety. 
- Children should be supervised to ensure that 
they do not play with the appliance.
If the supply cord is damaged, it must be replaced 
by the manufacturer, its service agent or similarly 
qualified persons in order to avoid a hazard.

ADDITIONAL SAFETY 

INSTRUCTIONS FOR YOUR 

BATTERY CHARGER

1.  Before charging, read the instructions.
2.  For charge Li-ion battery pack only.
3.  Do not charge a leaking battery.
4.  Do not use chargers for works other than those 

for which they are designed.

5.  Before charging, ensure your charger is 

matching the local AC supply.

6.  The charging device must be protected from 

moisture.

7.  Do not use the charging device in the open.
8.  Do not short out the contacts of battery or 

charger.

9.  Respect the polarity “+/-“ when charging.
10. Do not open the unit and keep out of the reach of 

children. 

11. Do not charge the batteries of other 

manufactures or ill-suited models.

12. Ensure that the connection between the battery 

charger and battery is correctly positioned and 
is not obstructed by foreign bodies.

13. Keep battery charger’s slots are free of foreign 

objects and protect against dirt and humidity. 
Store in a dry and frost-free place.

14. When charging batteries, ensure that the 

battery charger is in a well-ventilated area and 
away from inflammable materials. Batteries can 
get hot during charging. Do not overcharge any 
batteries. Ensure that batteries and chargers 
are not left unsupervised during charging. 

15. Do not recharge non-rechargeable batteries, as 

they can overheat and break.

16. Longer life and better performance can be 

obtained if the battery pack is charged when the 
air temperature is between 18°C and 24°C. Do not 
charge the battery pack in air temperatures below 
4.5°C, or above 40.5°C. This is important as it can 
prevent serious damage to the battery pack.

17. Charge only battery pack of the same model 

provided by manufacturer and of models 
recommended by manufacturer.

Содержание JMCDT218W













Отзывы: