Jobar BLACK FALCON, Руководство пользователя

Страница: 6 / 8

6
ON
OFF
BEO ADV
ON
OFF
BEO ADV
ON
OFF
BEO ADV
ON
OFF
BEO ADV
ON
OFF
BEO ADV
ON
OFF
BEO ADV
FLYING ENVIRONMENT
CAREFULLY INSPECT THE SURROUNDING AREA BEFORE REAL FLIGHT
1. Choose a wide open space without obstacles. Do not operate Drone near buildings,
crowds of people, high voltage cables, or trees to ensure the safety of others, yourself and
your Drone.
When the Drone flies sideways
(towards the left) in the process of
hovering, please continuously press
the right sideway trimmer until it
recovers.
When the Drone flies sideways
(towards the right) in the process of
hovering, please continuously press
the left sideway trimmer until it
recovers.
When the Drone flies backward in
the process of hovering, please
continuously press the foward
trimmer until it recovers.
When the Drone flies forward in the
process of hovering, please continu-
ously press the backward trimmer
until it recovers.
If the Drone can’t ascend vertically, you might need to
calibrate the Drone. You should hold the flip button while
pulling both left and right throttle sticks to the right corner.
The LED indication light on the drone will start blinking
rapidly. Release all throttle sticks and flip button after the
LED changes to a solid light, now calibration is completed.
Important notice: The red blade side of the drone is the forward direction. the
black blade side of the drone is the backward direction.
The acceleration trimmer is set at default balance point when
it is made. Please do NOT touch the trimmer unless you found
the following situations occur:
1: When you push the left throttle up to the top but the drone
can’t take off, push the trimmer up untill you hear a long “beep”
sound.
2: When you push the left throttle down to the bottom to stop
the motor but it is still spinning, push the trimmer down untill
you hear a long “beep” sound.