24
6 Slightly slacken the hinge screws. Attach the as-
sembled side casing between hinge carriers door
and boiler block so that slots 2 click correct into
place. Tighten the hinge screws.
8
Fit instrument panel
to cover, passing the various
wires through the hole. Before fitting the cover to
the boiler pass the feeding wire
and the burner wire
through the appropriate holes and fix by using the
wire holders as supplied in the electrical panel.
9 Threads any sensors into the appropriate open-
ings.
7 Fit the lower front panel “1”.
Fit the upper panel “2”.
Fit the top cover or covers “3”, according to the
length of the boiler (see table 1, sequence C).
Fig. 8
Fig. 9
Fig. 10
Fig. 11
