Joab Hookmaster Скачать руководство пользователя страница 48 | Manualshive

Страница: 48 / 59

Joab Hookmaster Скачать руководство пользователя страница 48

5.

Verify that all lighting and other electrical
equipment functions correctly.

6.

Check the hydraulic pump. If damage is found, contact
your JOAB workshop immediately.

Washing the Hook-Lift

Newly lacquered surfaces must be cleaned
using detergent and a sponge only. Do not use
a high pressure washer. A high pressure
washer should only be used after at least three
weeks following treatment of surfaces.

Detergents contain acids. Make sure that the
cleaning fluid used to clean surfaces contains
less than 9pH. The maximum temperature of
the cleaning fluid must not exceed 50 °C above
the ambient temperature. After washing, make
sure to rinse all surfaces thoroughly.

Cleaning the hook-lift with a high pressure washer entails risks. All electrical components, even
enclosed, are sensitive to water under high pressure.

When using a high pressure washer, make sure to hold the nozzle at least 45 cm from all
lacquered surfaces. Use a standard nozzle only, do not use a turbo nozzle.

Always apply fresh grease around lubrication points after washing. For more information
regarding the hook-lift's lubrication points, refer to below.

42

Service and Maintenance | Washing the Hook-Lift

Hookmaster manual: 13293 Edition 6 | 2021-02-22

«
...
46
47
48
49
50
...
»

Содержание Hookmaster




























































Отзывы:

Нет отзывов