JNJ SPAS SPA-308, Инструкция по программированию

Страница: 8 / 12

8
or Exchange the frequency form channel 3 to the present (Searching channel)
Ⅰ
)
、
Key
AUDIO
CD
is the ON/OFF key for radio and CD
。
and it is only available in the status of power on.
The first pressing is turning on the radio
，
the second pressing will turn off the radio and turn on the CD at the same
time
，
and the third
，
will turn off the radio and CD simultaneous
。
Ⅱ）、
LCD will show present frequency and volume of the radio after turning on the radio
。
Ⅲ）、
In the working of radio
，
The volumle of the present radio frequency can be changed by pressing
“
MIN
”
&
“
HOUR
” 。
Ⅳ）、
Pressing the key
“
CLOSE
”
will take out the memorized radio frequency
，
Pressing the key
“
CLOSE
”
continually will take out the memorized radio frequency from channels will be saved at present
channel by pressing this key continually
。
If none of the channel
，
LCD will display
“
---
” 。
Ⅴ）、
Press the key
“
MEM
”
could memorize the present radio frequency
，
Pressing the key
“
MEM
”
continually will memorize the present radio frequency in different channel
。
The channel of max
is 10
，
Name of channel is 0-9
。
Ⅵ）、
The volume can be changed by pressing key
“
SET
VOL+
”
&
“
OPEN
”。
(11)Operation to Pump :
KEY of “Pump1” are control surf pump1
。
Key of “Pump2” are control surf pump2
。
Key of “Pump 3” are
control surf pump3
，
Pump3 are circulation pump at the same time
。
The LCD will show
，
when circulation
and heating
（
Including preheating
）
are tune on
，
In spite of pump3 are on or off
。
PUMP1 & PUMP2 will auto off when working 2 hour later
。
(12) Operation to Ozone
：
The ozone could be started up in the status of circulation cleaning
。
Press the key
“
OZONE
”
to turn on/off the ozone
。
After the startup of ozone
，
if the user would not
change the working status of ozone
，
it will be turned off automatically 30 minutes later
。
(13) Operation to Bottom lamp
：
“ ”
controlling the ON/OFF of the lamp in the bottom of the bathtub
。
(14) Operation to Constant temperature heating
：
1)
、
When the pre-heating time is up
（
If the pre-heating has turned on
）
or press the
“
HEAT
”
will
also start constant temperature heating system
。
2
）、
After the startup of constant temperature heating
，
circulation pump will be running all the while
。
3)
、
For example
：
if the temperature is set at 35
℃，
when the water temperature reaches or exceeds 36
℃，
the heater will be turned off automatically and the circulation pump will stop after 5 second
（
If PUMP3 is turn
off
）。
However
，
when the water temperature reach or lower than 34
℃，
the heater will start up
。
4)
、
When the temperature sensor is open/short (LCD shows ”E1”)
，
the auto temperature control system
will not be available
，
Turning on/off the constant temperature system will turn on/off the heater
。
(15) Operation to blower
：