PWM Mode
Solar Charge Controller Manual
ADD
：
No.99 Yonghe Rd,High-Tech Zone,Hefei,Anhui
Phone
：
0551-65372576
http://www.hfjnge.com
- 11 -
4.3 Setting operation
4.4.1
、
General parameter setting
：
Press SET button in standby mode to enter undervoltage setting interface
，
continue to press
SET key to enter other Settings interface
，
press ESC button in any interface to exit setting interface
（
JN-K no ESC
，
stop in Settings interface for 5 seconds to exit the Settings interface
），
back to
standby screen, other general parameter Settings are similar to undervoltage Settings;
Figure 4-3 General parameter setting -- flowchart of battery undervoltage point setting
4.4.2
、
Light control parameter setting
Figure 4-4 Light-control parameter set
4.4.3
、
Time control parameter setting
Figure 4-5 Time control parameter setting diagram