JMS TPM-02 Скачать руководство пользователя страница 17

Страница: 17 / 20

EN-17

TROUBLESHOOTING

Phenomenon

Cause

Corrective action

Internal pressure adjustment

takes time.

Each component is not connected properly.

Check the connection of each part. If not, connect

properly. (See page EN-10.)

A broken Tongue Pressure Probe or a

Connecting Tube was used.

Replace with new Tongue Pressure Probe or

Connecting Tube. (See page EN-10.)

The batteries are exhausted.

Replace with new batteries. (See page EN-9.)

The device is defective.

Please ask for repair service.

Maximum tongue pressure

cannot be measured

correctly and is measured at

an abnormally low (high)

value.

The device is defective.

Please ask for repair service.

Measurements were made when the

Connecting Tube was bent.

Perform measurement again without bending.

The balloon was bitten during the

measurement.

Position the balloon correctly and compress the

balloon with tongue only. (See page EN-11-12.)

Loose connections in each component part

during the measurement.

Check for loose connections and reconnect

correctly. (See page EN-10.)

Tongue Pressure Probe or Connecting

Tube was broken during the measurement.

Replace with new Tongue Pressure Probe or

Connecting Tube. (See page EN-10.)

The device does not start

when the power button is

pressed.

The batteries are exhausted.

Replace with new batteries. (See page EN-9.)

The

“+” and “-” side of the battery are

reversed.

Mount the batteries in the correct direction. (See

page EN-9.)

“click” sound is heard

when the power is turned

ON, when the Prep/Reset

button is operated, or when

the power is turned OFF.

The solenoid valve opens and closes

automatically to return the measuring

system circuit to the atmospheric pressure.

This is normal and does not indicate a problem. The

device can be used safely.

Even if a new battery is

installed, the remaining

Battery icon is displayed low

or the Low battery is

displayed.

Battery performance may not meet the

device criteria, or may be degraded or

depleted.

※

Batteries may deteriorate depending

on the storage environment.

If Low Battery is displayed, replace batteries with

new ones.

Even if Battery icon is displayed low, you can still

use it if Low Battery is not displayed. (See page

EN-9.)

Содержание TPM-02





















Результаты поиска

Содержание TPM-02

Отзывы:

Бренды по названию

Популярные бренды

JMS TPM-02, Инструкция по эксплуатации

Результаты поиска

Содержание TPM-02

Отзывы:

Бренды по названию

Популярные бренды