JMQ Fitness RB3012, Инструкция по установке и эксплуатации

Страница: 7 / 11

Step 2
A) Place Item 10L, Item 10R and Item 1 as shown in the figure, lead the bolt (Item 22) through
Item 10 and Item 1, mount the flat gasket (Item 20), and then screw on the nylon nut (Item
21); finally, tighten the nylon nut (Item 21). The assembly method is the same for both sides;
B) Lead Item 11 through Item 10 as shown in the figure, and fix it on Item 10 with the bolt (Item
38) and the flat gasket (Item 20);
C) Lead Item 8 through Item 1 on both sides as shown in the figure, and fix it on adjustment
holes of Item 1 to adjust the angle of the backrest;
D) Insert Item 41 into Item 1 as shown in the figure, adjust the height as required, and then fix
Item 41 with Item 39;
E) Tighten all screws with the wrench after they are connected.