User interface:
Power
Status:
• Green flashing: Charging
• Green illuminated: Fully charged
• Red flashing: Fault
Charging phases
Charge level
Charging voltage
Selected battery type
Max. charging current
Supply function
Fault
Reconditioning
Adjustable charging mode:
2 A
Charging of 12 V batteries, 5 Ah to 50 Ah
Charge retention of 12 V batteries, 5 Ah to 80 Ah
Suitable for charging of lithium or standard batteries
8 A
Charging of 12 V batteries, 50 Ah to 160 Ah
Charge retention of 12 V batteries, 50 Ah to 250 Ah
Suitable for charging of lithium or standard batteries
2 A
Charging of 12 V batteries, 5 Ah to 50 Ah
Charge retention of 12 V batteries, 5 Ah to 80 Ah
Suitable for charging of gel, AGM or EFB batteries
8 A
Charging of 12 V batteries, 50 Ah to 160 Ah
Charge retention of 12 V batteries, 50 Ah to 250 Ah
Suitable for charging of gel, AGM or EFB batteries
Reconditioning: Suitable for heavily discharged lead batteries.
Caution: The battery should not be connected to the vehicle during the
process, due to the high voltage achieved in this charge cycle. Damage to
the on-board electronics may occur.
ATTENTION: DO NOT USE FOR LITHIUM BATTERIES
Supply function: 13.8 V – 5 A.
This function enables enables maintenance of the memory data of a vehicle
during battery changing or whenever the battery is disconnected from the
vehicle circuit.
ATTENTION: THIS FUNCTION DOES NOT PROTECT THE CHARGER
AGAINST REVERSE POLARITY. RISK OF DAMAGE!
Selection button/ Mode
(STD 2 A, STD 8 A, AGM 2 A, AGM 8 A,
RECON, )
