Brush supplied with unit
Using Your UV Ultra Vac
Power cable hook
4
5
Power cable
To release the power cable first pull and lift
the bottom power cable hook into the upright
position. Now slide the power cable from its
housing and unwind. When you are finished using
the appliance, lower the power cable hook into
its original position, click back into place and then
proceed to wind-up the power cable around
both parts.
Telescopic handle
To release the handle
, first ensure the appliance
is on a level surface. Press the release button,
this is located at the rear in the centre. You can
either use your finger or the power cable hook to
release it. Now slide the handle outwards until it is
fully extended and locks into place.
To close the handle
, press the telescopic handle
button located on the left hand side of the handle.
Push the handle so it slides back towards the main
unit, then click back into place. Please ensure the
handle is secure before picking up the unit.
NOTE
The handle on this appliance may seem overly
flexible, but it has been specially designed to
carry the entire weight of the unit.
1st
2nd
Release
button
Telescopic
handle
UV UltraVac_IM_B.indd 5
28/09/2011 15:23
