Using Your UV Ultra Vac
Dust box and filter
Before you remove the dust box or filter, please ensure
you switch off the appliance and unplug the power cable.
To release, press the button located on the top of the dust
box then lift the dust box out.
To remove the filter, ensure the dust box is facing
downwards, (this will stop the contents falling out). Grip
the filter with 2 fingers and pull.
It is recommended that you empty the contents into an
outside bin or sealed bin then brush the filter with the tool
supplied to clear any debris.
(The filter can be hand washed in water. Leave to dry
completely before replacing back into the dust box.)
DO NOT MACHINE WASH
To reassemble, place the clean, dry filter back into the
dust box, then push the dust box back into the unit until
it clicks.
Hose attachment / crevice tool
The unit is supplied with a hose attachment; this can be
used for cleaning hard to reach places.
The hose pushes into the suction hole located on the
base of the appliance. First remove the grill, (this will pull
out) and proceed to push the hose into the hole. Please
note that the UV-C bulb will not be active with the hose
attachment in place due to the safety wheels not being
depressed - this is a safety feature. If for any reason it
should activate, immediately turn off the unit and contact
JML customer service on
0800 781 7831
.
There is also a space saving hook located between the
rear wheels. This can be used for easy storage.
8
9
UV UltraVac_IM_B.indd 8
28/09/2011 15:23
