JML EZ Bed 109T, Инструкция по эксплуатации

Страница: 5 / 8

5
Using your EZ Bed
• Unplug and store the cord in the cord
storage pocket.
• The frame will automatically extend from
its storage case.
• Pump does not turn off automatically. DO
NOT leave on for more than five minutes.
• When EZ Bed reaches desired
firmness, turn switch to the Off position.
• EZ Bed is ready for use.
3.
4.
5.
• DO NOT set anything on top or around
EZ Bed during inflation.
• EZ Bed will expand to approximately 9ft in
length and 7ft in width. Clear space
accordingly.
• Plug pump into a polarised 230V AC
outlet.
• Turn switch to Inflate position, EZ Bed will
begin to inflate.
2.
1.
Unzip the storage case completely before
inflation. Make sure the panel of the storage
case is laid flatly on the floor, this will prevent
damage to the bed frame and ensure the
smooth extension out of its storage case.