3
Safety Warnings & Advice
• We advise regular inspection of the EZ bed and that any maintenance required is carried
out before use.
• This is an electrical product. To avoid risk of fire, burns, injury, and shock, it should not be
played on or placed near where small children can reach it.
DO NOT
use in or around
water.
• KEEP AWAY FROM FIRE AND OTHER HEAT SOURCES.
• Make sure there are no sharp objects, steps, drops, or breakable objects where you intend
to lay out EZ Bed before use.
• Unplug when not in use.
SAVE THESE INSTRUCTIONS. This appliance is double insulated. In a double-insulated
product, two systems of insulation are provided instead of grounding. No grounding means
is provided on a double-insulated product, nor is a means for grounding to be added to the
product.
Servicing a double-insulated product requires extreme care and knowledge of the system,
and is to be done only by factory-qualified service personnel. Replacement parts for a
double-insulated product must be identical to the parts they replace.
NOTE:
• Airbed material may stretch during first use and may need additional air to reach desired
firmness.
• Air inside of EZ Bed may expand and contract with varying temperatures, potentially
leading to reduced pressure inside of the bed. If this occurs, simply add more air using the
built-in pump to achieve desired firmness.
PUNCTURE REPAIR
(Repair kit included):
1. First, deflate the bed by following the instructions for deflation. Clean and repair the
affected area thoroughly.
2. Cut a piece of clear patch material (included in the repair kit) into a size that will cover the
puncture.
3. Apply the self-adhesive patch over the affected area by peeling off the backing and placing
sticky side down on the bed. Rub patch to ensure adhesion. Allow four hours for repair to
set before attempting to inflate the airbed.
Содержание EZ Bed 109T
Страница 1: ...Instructions ...
