NT-2000 REF Manual
Control Panel Functions
2-10
2. Control Panel Functions
(
continued – 10/10
)
⑯
Store Message Key
･
This key is used to place a specific NAVTEX message in permanent storage,
thereby protecting it from being erased from memory automatically after the
maximum message storage limit (200 messages) is reached.
･
Pressing this key attaches a “
PROTECTED
” tag to the ID of the message you
wish to protect, and pressing
*
removes the tag from the message, as in the
example below.
*
User confirmation is required. See
⑰
below.
Figure 2-12 Attaching / Removing Message Protection Tag – Example
･
Up to 50 messages can be protected. An attempt to protect messages beyond this
limit causes an operational error, turning on the following caution message in the
message prompt line (screen’s bottom line):
･
The message storage capacity will increase by 50 to 250 messages when 50
received messages are protected.
⑰
Clear Key
The major functions this key provides are:
･
*
1
removing the message protection tag (
PROTECTED
I
) from the currently
displayed protected NAVTEX message.
･
removing the new message tag (
II
NEW MESSAGE
II
) from a new message, and
･
turning off all menus at a time, returning to the first receiver message page when
making settings via the
*
2
menu system.
*
1
:
Removing the message protection tag requires
your confirmation, as shown at right.
Use
/
to select the desired option and
then press
.
*
2
:
See section 4 for more information.
KA66
PROTECTED
170520 UTC JUN 05
UNDERWATER RESEARCH
･･･
OPERATED VEHICLE
･････････
･････････････････････････････
･････････････････････････････
･････････････････････････････
NNNN
STORED (CER=00%)
Protection tag is attached
.
KA66
170520 UTC JUN 05
UNDERWATER RESEARCH
･･･
OPERATED VEHICLE
･････････
･････････････････････････････
･････････････････････････････
･････････････････････････････
NNNN
STORED (CER=00%)
Protection tag is removed
.
ARE YOU SURE ?
1: NO ( CANCEL )
2: YES ( EXECUTE )
[
▲
] [
▼
] [ ENT ]
STORAGE LIMIT IS REACHED !
