background image

Dear Customer, thank you for purchasing our JMB-Jets jet product. 

Following you can find greater information for building and flying this model. 

Before you get started building and setting-up your aircraft, please make sure 

you have read this Instruction manual and understood it. If you have any 

questions, please don’t hesitate to contact us.

 

Liability Exclusion and Damages, you have acquired a kit, which can be 

assembled into a fully working R/C model when fitted out with suitable 

accessories, as described in the instruction manual with the kit. 

However, as manufacturers, are not in a position to influence the way you 

build and operate your model, and we have no control over the methods you 

use to install, operate and maintain the radio control system components. For 

this reason we are obliged to deny all liability for loss, damage or costs which 

are incurred due to the incompetent or incorrect application and operation of 

our products, or which are connected with such operation in any way. Unless 

otherwise prescribed by binding law, the obligation of our company to pay 

compensation is excluded, regardless of the legal argument employed. 

This applies to personal injury, death, damage to buildings, loss of turnover 

and business, interruption of business or other direct and indirect consequent 

damages. In all circumstances our total liability is limited to the amount which 

you actually paid for this model. 

BY OPERATING THIS MODEL, YOU ASSUME FULL RESPONSIBILITY FOR 

YOUR ACTIONS. 

It is important to understand that the factory, is unable to monitor whether you 

follow the instructions contained in this instruction manual regarding the 

construction, operation and maintenance of the aircraft, nor whether you 

install and use the radio control system correctly. For this reason, we are 

unable to guarantee, or provide, a contractual agreement with any individual 

or company that the model you have made will function correctly and safely. 

You, as operator of the model, must rely upon your own expertise and 

 

judgement in acquiring and operating this model

Содержание Boeing TX/ T7A
















Отзывы: