9
Pin 1: +ve polarity signal
Pin2; -ve polarity signal
Pin3: Grounded.
3
、
DMX512 cable must use the professional shielded twisted pair cable; standard
loudspeaker cable is not reliable to control the long-range data.24AWG cable is suitable for
more than 300 meters long-distance signal transmission and must add DMX 512 signal
amplifier.
4
、
Do not use two outputs to separate the connection, if separate a continuous connection
to branch, DMX512 splitter is necessary.If use the DMX512 splitter. At first connect
DMX512 Splitter input terminal to controller .And then connected from the splitter output
terminal to next device.Do as above guide to connect other device, and finally coupled with
terminal insertion.
7.
AC POWER
7.1
VOLTAGE, POWER, FUSE SPECIFICATION
Input Voltage
Frequency
Total Power
110~240V
50/60Hz
300W
Fuse voltage
Electronic current
Specification
250V
8A
5
×
20
7.2
POWER PROTECT
The equipment must be operated by professionals; Make sure that the voltage of power supply
must be comply with the voltage identified on the lamp, and must have an overload or leakage
electrical protection.
ATTENTION
！
Factory has equipped the standard 3 pin plug socket. Connect the power supply as below table.
If lamp cable is damaged, replacement should be operate by factory or qualified staff. Any
question, please contact professionals or talk to a qualified electrician.
Live wire (
L)
Null (
N)
Ground wire
BROWN
BLUE
Green
8
、
LED LAMP MODEL AND REPLACE
8.1
LED LAMP DESCRIPTION
