JLL RE100, Инструкция по эксплуатации

Страница: 15 / 20

15
3
Operation
Read all instructions, warnings and safety procedures located in the Safety chapter
before using the bike.
HEART-RATE SENSORS
Hold the sensor plates on the handlebars ensuring that your hands are clean. A
heart- rate reading will show on the display. Factors that interfere with pulse signal are:
• Hand lotions, oils or body powder.
• Excessive dirt.
• Excessive movement.
NOTE: Heart-rate is calculated by PPM (Pulsations per minute).
DATA READOUTS
As you exercise, the bike keeps track of the following data:
• Time : The total time you have been working out or time remaining. Display time as
hours
:
minutes
.
• Speed : Your current speed, displayed in kilometres per hour (km/h).
• Distance : The total accumulated distance, in kilometres during your workout.
•
Calories
: The total accumulated calories burned during your workout.
• Heart-rate : Your current heart-rate. Heart-rate will appear when a pulse signal is
detected. Use the sensor plates on the handlebars to display your heart-rate.
• Odometer : The total accumulated distance, in kilometers since the bike has been
first used.
•
Scan
: Automatically scans through each mode in sequence every six seconds.