MACHINE OPERATION
Section 1
Page 1-17
1001206598
METRO-MH
TURNING-ON THE ENGINE/LIGHTS
OPTIONAL CONTROLLER MODULE
1)
Manual Start/Stop - Summary
Manual Start/Stop is initiated by the
following pushbutton sequence.
Start
A)
press
then
wait
for engine start-up period
wait
for machine to warm-up
B)
press
to turn each light
Stop
C)
press
to shut-down.
wait
for machine to complete
shutdown sequence.
2) Auto Start/Stop - Summary
A)
press
for each screen shown in Fig 1 to Fig 3
press and
to select
press or
to confirm
B) 10 seconds before engine start-up time
an audible
alarm sounds
At pre-set start time, engine cranks
C)
wait
for generator to reach the
“on-load”
requirement.
D)
When the “
stop delay
” time is reached
all lights will turn off in sequence.
When all lights are off, the engine runs
through a cool-down cycle before
stopping.
