SECTION 6 - SERVICE AND MAINTENANCE
1001070465
LIFTPOD by JLG
6-8
6.4
SERVICING AND MAINTENANCE
GUIDELINES
General
The following information is provided to assist you in the use and
application of service and maintenance procedures contained in
this chapter.
WHEN AN ABNORMAL CONDITION IS NOTED AND PROCEDURES CON-
TAINED HEREIN DO NOT SPECIFICALLY RELATE TO THE NOTED IRREG-
ULARITY, WORK SHOULD BE STOPPED AND TECHNICALLY QUALIFIED
GUIDANCE OBTAINED BEFORE WORK IS RESUMED.
Safety and Workmanship
Your safety, and that of others, is the first consideration when
engaging in the maintenance of equipment. Always be conscious
of moving components and pinch points. Do not allow heavy
objects to rest in an unstable position. When raising a portion of
the equipment, ensure that adequate support is provided.
Cleanliness
The most important single item in preserving the long service life
of a machine is to keep dirt and foreign materials out of the vital
components. Precautions have been taken to safeguard against
this. However, these items must be maintained on a scheduled
basis in order to function properly.
DO NOT LUBRICATE THE MACHINE. ENSURE THAT THE MAST AND
EMERGENCY BRAKE ARE CLEAN AND FREE OF DEBRIS, OIL AND
GREASE.
Component Disassembly and Reassembly
When disassembling or reassembling a component, complete the
procedural steps in sequence. Do not partially disassemble or
assemble one part, then start on another. Always recheck your
work to assure that nothing has been overlooked. Do not make
any adjustments, other than those recommended, without obtain-
ing proper approval.
Go to Discount-Equipment.com
to order your parts
