SECTION 1 - ANALYZER OPERATION - ALL
1-2
– JLG Lift –
3124288
The
ESC
key may be used to leave a sub-menu at any
time.
1.3 CHANGING THE ACCESS LEVEL OF THE
HAND HELD ANALYZER
When the analyzer is first connected, you will be in access
level 2 which enables you to only view most settings
which cannot be changed until you enter a password to
advance to a lower level. This ensures that a setting can-
not be accidentally altered. To change the access level,
the correct password must be entered. To enter the pass-
word, scroll to the
ACCESS LEVEL
menu. For example:
MENU:
ACCESS LEVEL 2
Press
ENTER
to select the
ACCESS LEVEL
menu.
Using the
UP
or
DOWN
arrow keys, enter the first digit of
the password, 3.
Then using the
RIGHT
arrow key, position the cursor to
the right one space to enter the second digit of the pass-
word.
Use the
UP
or
DOWN
arrow key to enter the second digit
of the password which is 33271.
Continue using the arrow keys until all the remaining digits
of the password is shown.
Once the correct password is displayed, press
ENTER
.
The access level should display the following, if the pass-
word was entered correctly:
MENU:
ACCESS LEVEL 1
Repeat the above steps if the correct access level is not
displayed or you can not adjust the personality settings.
Go to Discount-Equipment.com
to order your parts
