JLCooper Electronics MixMate, Руководство пользователя

Страница: 57 / 59

Chapter 11 QUICK OPERATION REFERENCE MixMate (NORMAL)
1.Hookup Audio. Patch MixMate into channel insert points, patch bay, or
between instruments and mixer.
2.Select Sync.
Choose one of MixMate's four sync options: "smart" FSK, MIDI SYNC,
SMPTE, or SMPTE with MTC.
Do sync hook-up and stripe if necessary using SHIFT:STRIPE
3. Clear memory using SHIFT: ERASE.
4. If using "smart" FSK, set sequencer or drum machine to MIDI sync.
Select SLOW or FAST CHASE mode (if required) by holding SYNC key.
ENABLE key #1 selects FAST. ENABLE KEY #2 SELECTS SLOW. The
LEDs indicate selection.
5. Determine initial levels by doing a "trial run" in MANUAL MODE.
(a) Tap MODE key until both WRITE and UPDATE LEDs are on.
(b) Start tape transport or other source of sync.
(c) Move faders to get a general idea of where you want them to start.
(d) Enter MUTE MODE by pressing MUTE button (MUTE LED on), and
select initial mutes. Exit MUTE MODE.
6. Roll back to top of song (or scene),prepare to do a first pass of either
mute moves or fader moves . To enter fader moves, enter WRITE MODE
by pressing MODE key until WRITE LED is on. Enable all faders using
ENABLE keys. To enter mute moves, select MUTE MODE.Start tape (or
other source of sync) and enter moves.
7. Edit mix using WRITE MODE to replace moves. NULL LEDs indicate
when the real fader represents the actual level of the VCA.Use UPDATE
MODE to rescale moves. NULL LEDs indicate the update reference point.
8. Do mixdown in READ ALL MODE.
9. Save session via SYSEX by pressing SHIFT key and while holding,
press SYNC and MODE.
55