JLCooper Electronics MixMate, Руководство пользователя

Страница: 31 / 59

29
tracks and the screen. If you desire to change the appearance of the
screen, select COLOR (or Inverse) and FADERS (if you have not already
done so). If locking to "smart" FSK, you may wish to enter a time-signature
and turn on the Bar/Beat indicator, using SET-UP: METER.
MixMate has four fader edit modes. Tapping the MODE key cycles
through the various edit modes you will use for mixing.
MANUAL MODE is the simplest mode of operation. In MANUAL MODE,
fader and mute moves are not memorized and incoming sync of any kind is
completely ignored, except that it is translated to MTC or MIDI Clocks as
appropriate, and sent out of the MIDI OUT connector. MANUAL MODE is
used to verify audio and also to experiment with a mix while tape is rolling
without committing moves to memory.
To put MixMate into MANUAL MODE, tap the MODE key until both
WRITE and UPDATE LED's are lit.
WRITE MODE is the mode in which fader and mute moves are "recorded"
by MixMate 's memory while locked to any type of sync. When an au-
dio channel is put into WRITE MODE, fader and mute moves will replace
(or "overwrite") all previously recorded moves on that audio channel.This
overwriting can take place on any number of selected (ENABLED) chan-
nels. (Unlike some gain controllers,
MixMate lets you move as many fad-
orient
yourself