JLCooper Electronics GangWay32, Руководство пользователя

Страница: 6 / 12

6
Connecting the Gangway32
Connecting the Gangway32 is quite straightforward. The
Gangway32 typically connects between one or two controller(s)
and up to 32 slave devices as shown in the following diagram.
Connect your deck controller into the Controller port on the rear
panel. Alternately, your deck controller can be plugged into the
Controller port on the front panel if it is more convenient. In this
case, make sure the front panel Enable button is illuminated.
Connect your slave devices to the numbered ports on the rear
panel. You can connect up to 32 slave devices to the Gangway32.