Yamaha 01V
Select MIDI Setup screen.
Under receive (Rx), set Control Change to ON.
Param Change to OFF.
Confirm also the PORT is set to MIDI.
Yamaha 03D
Select MIDI Setup screen.
Under receive (Rx), set Control Change to ON.
Param Change to OFF.
Select Utility screen.
Under Host Interface, select STANDARD I/F.
Under General Setup, set Rx port to CH 1, MIDI.
Yamaha DM1000
Press Display Access MIDI. Select SETUP tab.
Set Parameter Change RX=ON, Channel RX =1, Fader Resolution=LOW
Press Display Access Setup. Select MIDI/HOST tab.
Set RX Port = MIDI
Mackie DM8
You must have Version 2.01 or newer to operate with DAFV
2
.
Open the “Channel List” window (control B.)
On all input channels that are to be controlled by the DAFV
2
, set the following:
Ch. = Ch. 1 Mode = In MIDI = On
Any other control parameters should be left in their default settings.
Then, you must go to the FILE menu and select Save Session (or use keyboard
shortcut CTRL S.) (Without this Save operation, you will need to edit the CHAN-
NEL LIST each time.)
Roland VM-C7100/VM-C7200
These mixers where not available at the time of manual printing. Please contact the
factory for an addendum relating to Roland VM-C71000 setup, when it becomes
available.
Spirit Digital 328
Press MENU button (lower right of display).
Scroll down with Param to until “Automation Setup” is flashing, press ENTER.
If the display indicates “MIDI Dynauto:OFF”, turn Param to set “MIDI
Dynauto:ON”. Press Exit.
Mic/Line channels 1 through 16 will be controlled.
12
