Installation Detail
Scanner Installation (cont.)
If you have a Symbol 3400 series scanner proceed with step 8.
8. Place a supplied cable tie through slot in scanner handle as shown in figure 9.
Figure 9
9. Draw the cable tie around the base of the scanner as shown.
Figure 10
10. Tighten the cable tie as shown in figure 11. This method will allow for the screws at the bottom of
the scanner to be removed and the scanner cable to be inserted or removed as necessary without
affecting the
JLC Solutions
retractor cable tie.
Figure 11
JLC 520S v.215.1
!
5
