Page 4 • JL Audio, Inc., 2015
Continued on Next Page
S T E P 8
Remove the four indicated lower subwoofer
enclosure bracket bolts.
S T E P 7
Pull the trunk liner away to gain access to the
subwoofer enclosure bracket.
S T E P 6
Remove the two 13 mm bolts securing the
bottom of the factory subwoofer enclosure to
the subwoofer enclosure bracket. Remove the
T-40 Torx bolt securing the top of the factory
subwoofer enclosure to the subwoofer
enclosure bracket.
Unplug the subwoofer, and remove the
enclosure from the vehicle.
S T E P 5
Note: Steps 5-13 are only necessary in
vehicles equipped with the factory
subwoofer. If vehicle does not have the
factory subwoofer, skip to Step 14.
Remove the three T-20 Torx screws securing
the lower trim panel to the factory subwoofer
enclosure, and remove the trim panel.
S T E P 4
Remove the clip holding the top of the trunk
liner to the vehicle on the passenger side.
S T E P 3
Carefully unclip the trunk sill panel, and
remove the panel from the vehicle.
Remove the cargo floor panel from the vehicle.
S T E P 2
Remove the cargo net hooks from both sides
of the trunk sill panel.
S T E P 1
Empty out the trunk of the vehicle.
Some models are not equipped with the
pictured factory subwoofer.
SB-F-MUSCPE/12TW3 INSTR_SKU# 011432