Continued on Next Page
SMS-C-CTS INSTR_SKU# 011357
Page 12 • JL Audio, Inc., 2013
S T E P 6 8
Begin the dash speaker installation by carefully unclipping
the driver’s side A-pillar from the top. Remove the pillar.
Repeat for the passenger side.
S T E P 7 2
Using the color code in
Step 40
as a guide, wire the C2-350x
Speaker, and secure the Speaker and Dash Speaker Adaptor
using the factory screws as shown.
Repeat for the driver’s side.
S T E P 6 7
Using the color code in
Step 42
as a guide, wire the input
wires for the Crossover. Connect the woofer and tweeter
wires to the C5-650x Speaker, and secure the Speaker to the
Door Speaker Adaptor using eight #8 x 3/4” Pan Head Screws.
Attach a Thick Foam Strip around the outside of the Speaker.
Reinstall the door panel.
Repeat
Steps 51-54 and 59-67
for the driver’s side.
S T E P 7 1
Steps 71-72 are for the Premium System Only.
Pictured are the Dash Speaker Adaptors.
S T E P 6 6
Attach the 16 Gauge Speaker Cable to the Crossover as
dictated in the manual for the C5-650x Speakers. Set the
Midrange Presence jumper in the High position, and the
Tweeter Level jumper in the -3 dB position.
S T E P 7 0
Unscrew the factory speaker from the passenger side.
Unplug and remove the speaker.
S T E P 6 5
Slide a pair of Speed Clips over the Crossover mounting holes
in the Crossover Bracket, and secure the Crossover using
a pair of #8 x 3/4” Pan Head Screws. Secure the Crossover
Bracket to the door with the factory screw as shown.
S T E P 6 9
Carefully unclip and remove the forward dash panel.
