JD
400/4
15
APPENDIX B:
JD400/4 Specifications
Amplifier Section:
Amplifier Topology:
NexD™ Ultra-High Speed Class D
Power Supply:
Unregulated MOSFET switching type
Rated Power at 14.4V with less than
1% THD+Noise (20 Hz - 20 kHz) RMS Method
Stereo, all channels driven:
75W RMS x 4 @ 4 ohms, 100W RMS x 4 @ 2 ohms
Bridged, all channels driven:
150W RMS x 2 @ 8 ohms, 200W RMS x 2 @ 4 ohms
Rated Power @ 12.5V with less than
1% THD + Noise (20 Hz - 20 kHz) RMS Method
Stereo, all channels driven:
60W RMS x 4 @ 4 ohms, 90W RMS x 4 @ 2 ohms
Rated Power Bridged, all channels driven:
120W RMS x 2 @ 8 ohms, 180W RMS x 2 @ 4 ohms
Signal to Noise Ratio:
>104 dB referred to rated power
(A-weighted, 20 Hz-20 kHz noise bandwidth)
>84 dB referred to 1W
(A-weighted, 20 Hz-20 kHz noise bandwidth)
Frequency Response:
12 Hz - 22 kHz (+0, -1 dB)
Damping Factor:
>150 @ 4 ohms per ch. / 50 Hz
>75 @ 2 ohms per ch. / 50 Hz
Input Section:
No. of Inputs:
Two Stereo Pairs
Input Type:
Differential-balanced with RCA jack inputs
Input Range:
200mV - 8V RMS
Signal Processing:
Filter Type:
State-variable, 12 dB/octave Butterworth
with continuously variable cutoff frequency selection
from 50 - 500 Hz.
Configurable as Low-Pass or High-Pass. Defeatable.
Preamp Output:
Buffered pass-through type, from
CH. 1&2 inputs.
Power Connections:
Recommended Fuse Value:
40A
Minimum Copper Power/Ground Wire Gauge:
4 AWG
(Note: Do not use Copper Clad Aluminum (CCA) wire.)
Dimensions (LxWxH):
9.50" x 7.50" x 2.10" (242 mm x 190 mm x 53 mm)
Due to ongoing product development, all specifications are subject to
change without notice.
Содержание JD 400/4
Страница 19: ...JD400 4 19 ON PREOUTS CH 1 2 only 3 4 Clipping...
