Continued on Next Page
SMS-P-987C INSTR_SKU# 011358
S T E P 1 2
Connect one piece of 16 Gauge Speaker Cable to the woofer
connections on the C5-650x Speaker, and connect the other
piece of 16 Gauge Speaker Cable to the tweeter connections
on the C5-650x Speaker.
Mount the C5-650x Speaker to the Speaker Adaptor using
eight #8 x 3/4” Pan Head Screws.
S T E P 1 6
Secure the Crossover Mounting Plate to the factory midrange
mounting screw holes using the factory screws in vehicles
with the Premium System, or a pair of #8 x 1/2” Pan Head
Screws on vehicles with the Base System.
S T E P 1 1
Route two pieces of 16 Gauge Speaker Cable through the
grommet in the door and out through the speaker hole in
the Speaker Adaptor.
S T E P 1 5
Pictured is the factory midrange mounting screw hole with
the tab removed.
S T E P 1 0
Secure the Speaker Adaptor to the door using the factory
screws. Attach a second piece of Foam Tape around the
speaker hole in the Speaker Adaptor as shown.
S T E P 1 4
Grind or cut off the small tab near the factory midrange
speaker mounting screw hole.
S T E P 9
Attach a piece of Foam Tape around the factory speaker hole
as shown.
S T E P 1 3
Premium System Only:
Unplug, Unbolt, and remove the factory midrange speaker
from the door panel.
This step is not necessary in vehicles with the Base System.
Page 5 • JL Audio, Inc., 2013
