Continued on Next Page
SB-P-996/13TW5v2 INSTR_SKU# 011334
Page 6 • JL Audio, Inc., 2016
S T E P 2 8
Loosen the front outer strut nut on the passenger side as
indicated.
S T E P 3 2
Align the Driver Enclosure Bracket as shown, and secure it to
the Stealthbox® using a 3/8 - 16 x 1-1/4” Hex Nut, a 3/8” Split
Lock Washer, and a 3/8” Flat Washer.
Repeat for the opposite side using the Passenger Enclosure
Bracket.
S T E P 2 7
Repeat
Step 26
for the opposite side, then reinstall the rear
trim panel.
S T E P 3 1
Pictured is the orientation of the Driver and Passenger
Enclosure Brackets when mounted to the Stealthbox®.
S T E P 2 6
Slide a U-Nut over the short end of a Rear Bracket, and thread
a 3/8 - 16 x 2-1/4” Set Screw into the U-Nut as shown. Place
the long end of the Rear Bracket over the 3/8 - 16 x 1-3/4”
Hex Bolt as shown. Align the Rear Bracket so that the short
end faces the front of the vehicle.
Secure the long end of the Rear Bracket to the 3/8 - 16 x
1-3/4” Hex Bolt with a 3/8” Flat Washer, a 3/8” Split Lock
Washer, and a 3/8” Hex Nut. Slide a 3/8” x 1-1/2” Vinyl Cap
over the 3/8 - 16 x 1-3/4” Hex Bolt.
S T E P 3 0
Repeat
Steps 28-29
for the driver’s side using the Driver
Front Bracket.
S T E P 2 5
Reinstall the lower carpeted panel.
S T E P 2 9
Slide the Passenger Front Bracket under the nut, align it so
that the upper hole faces the front of the vehicle, and tighten
the nut.
