JKS 3575
JKS J-CAL Installation
4 Page
Vehicle Functions (cont.)
TRANSFER CASE LOW (T.CASE LO)
Improve your Jeep’s 4 Lo shift points by modifying the
transfer case gear ratio.
To adjust the Transfer Case Low Gear Ratios:
Choose an option from the Vehicle Functions Menu.
Use the left/right buttons to adjust the value.
Press OK.
HORN CHIRP ON LOCK (HORN CHIRP)
Toggle ON/OFF the keyless entry horn chirp.
HEAD LAMP FLASH ON LOCK (LAMP FLASH)
Toggle ON/OFF the keyless entry head lamp flash.
ONE TOUCH LANE CHANGE (ONE TOUCH)
Toggle this vehicle feature ON or OFF. When this feature is
turned OFF, your blinker will only blink once after pressing
the switch.
To adjust the Once Touch Lane Change, Lamp Flash, or
Horn Chirp settings:
Choose an option from the Vehicle Functions Menu.
Use the up/down buttons to highlight either OFF or
ON.
Press OK.
Vehicle Functions (cont.)
HEAD LAMP DELAY (LAMP DELAY)
Adjust the time it takes for the head lamps to turn off after
the engine has been turned off (2011-15 models only).
To adjust the Head Lamp Delay settings:
Choose an option from the Vehicle Functions
Menu.
Use the left/right buttons to adjust the value.
Press OK.
DAYTIME RUNNING LIGHTS (RUN LIGHTS)
Adjust the daytime running light settings for 2007-13
vehicles (if the vehicle is equipped with this feature). The
running lights are activated while the engine is running,
and the transmission is in “drive”.
There are six available settings:
Â
High Beams
European
Â
Turn Signals Fog Lights
Â
Low Beams
Turn Lights OFF
ENGINE IDLE
Increase the engine idle up to 1600 RPM. This is
especially useful during extreme situations. (e.g. Winching,
etc.)
To adjust the Engine Idle settings:
Start the engine
Choose Engine Idle from the Vehicle Functions Menu.
Use the left/right buttons to adjust the value.
Press OK.
NOTE: The device must remain connected in order for
this feature to continue working.
RETURN TO STOCK
Quickly change your vehicle back to stock with the original
settings. The vehicle cannot be running in order to use this
feature.
