JKEXER AeroWork 897, Руководство пользователя

Страница: 19 / 26

SECONDARY CONTROL PANEL OPERATION
Once master computer is flipped down, LED on secondary control panel will light up for
operation.
1. Insert Safety Key, Time LED lights up. Press to begin exercise, TIME LED flashes
as Scan mode to display TIME, SPEED, DISTANCE, CARLOIES, PULSE and STEP at 6
seconds interval.
2. To focus on the data of certain function, press , TIME LED stops flashing. Press
again to switch to next Speed LED. Following this operation to display the rest.
3. Whenever you hold both hands on the pulse plate or wear a transmitter, it will jump to
PULSE LED to show your heart rate. And you need to press to view other function.
4. In scan mode, when adjusting speed or holding two hands on pulse plate/wearing
transmitter to detect heart rate, LED jumps to SPEED LED or PULSE LED to show new
speed data or heart rate. After 10 seconds, it will start to re-scan.
SECONDARY CONTROL PANEL BUTTON INSTRUCTION
1. FAN BUTTON
To turn fan on or off. It also works when master computer flips up.
2. MODE BUTTON
To show and switch LED
3. STOP BUTTON
1) To stop the machine
2) 20 minutes after pause mode, whole system will be reset.
4. START BUTTON
To start the machine
5. SLOW / FAST BUTTON
To decrease or increase speed
6. 10W USB CHARGER for tablet and cell phone
7. For headphone
8. For audio input
NOTE
If no one runs on the treadmill, machine will stop automatically after 3 minutes.
HANDLEBAR SPEED BUTTON
Speed can be controlled from handlebar speed button by increasing or decreasing 0.5 KPH.
HANDLEBAR INCLINE BUTTON
Incline can be controlled from handlebar incline button. Please note this is not available when
using secondary control panel.
17
MODE
MODE
MODE