JKEXER Acute 3955, Руководство пользователя, Страница: 7 / 12

5
RESISTANCE ADJUSTMENT:
Pedalling resistance is controlled by the tension knob located under the handlebar. To
increase resistance, turn the tension knob clockwise. To decrease resistance, turn the
tension knob counter clockwise.
SEAT ADJUSTMENT:
Proper seat adjustment is critical to exercise efficiently and
avoid the risk of injury.
To determine whether the seat is properly, adjust seat on the
exercise bike, place one pedal in the down position and enter
your foot over the center of the pedal. Your leg should be only
slightly bent. If you are stretching or your leg isn't extended
sufficiently the seat should be adjusted as required.
After adjusting it is very important to make sure that the seat
locking pin is securely locked into position.
1. To adjust the height of seat simply turn the adjustable knob
loose. Then pull the knob and move the seat up or down to the desired height. (there
are different seat height positions) .
2. To adjust the seat position. Turn the fixing knob loose then pull the knob to move the
seat to the desired position. Then fix the fixing knob.
LEVELING:
After completing the installation, if the floor/equipment is not even adjust foot pads
underneath stabilizers to level the frame.
HANDLEBAR ADJUSTMENT:
1. To adjust height of handlebar, simply turn the
ADJUSTABlE KNOB loose then pull the knob and move
handlebar post up or down to the desired height. There
are 6 holes for adjusting different positions.
2. To adjust handlebar position, just turn the fIXING KNOB
loose and move it back and forth to the desired positon.
Then fix fIXING KNOB again.
BELT ADJUSTMENT:
The belt on this bike has been pre-adjusted and should not require immediate attention.
Continuously use of bike may cause the belt become loose and need to be adjusted.
When to adjust:
When stepping heavily on the pedal and found belt was slipping that meant belt was
Operating Instruction