background image

1

IMPORTANT SAFETY INFORMATIONS

WARNING:

Before starting any exercise program, it is recommended that you consult your 

physician, especially for persons with pre-existing health problems .  Before using 

the new equipment, please review this manual to learn about the features, functions, 

and safety operations .  Should you experience any irregular physical conditions 

such as dizziness, severe muscle or joint pain, pain in your chest or should any 

other symptoms appear:  STOP EXERCISING and consult with your physician 

immediately . 

1.  Read all instructions in this manual before using this equipment.  It is the owner’s 

responsibility to ensure that all users of this equipment are thoroughly informed of all 

warnings and precautions. Use this equipment for its intended use as described in this 

manual.

2.  Securely tighten all nuts and bolts and inspect and tighten all parts each time you use 

the equipment.  **Replace any worn parts immediately and if you find that any repairs 

are needed, please keep the equipment out of use until repair.**

3.  Inspect the Crank Arms and Pedals daily for any signs of stress fatigue, and check 

Brake Pads for its wear periodically. The safety level of the equipment can be 

maintained only if it is examined regularly for damage and wear.

4.  Press down on the red emergency brake lever under the tension knob to STOP cycling 

immediately.

5.  The equipment should only be used on a level surface and is designed for indoor use 

only.

6.  Warm up before you start exercising to prevent injuries

7.  No more than one person should operate the equipment at one time.

8.  It is recommended that you do not initiate any type of exercising within 40 minutes after 

a meal.

9.  Keep small children and pets away from the equipment at all times

10. Appropriate clothing should be worn while exercising.  Never wear loose clothing that 

could be caught in moving parts.  It is recommended that athletic support clothing be 

worn for both men and women.  Athletic shoes should always be worn while exercising.  

DO NOT USE with bare feet, wearing sandals, or wearing only socks or stockings.

11. The user’s max weight to operate the equipment is 150kg / 330 lbs.

12. DO NOT USE the equipment around water or while you are wet.  Using the unit around 

a pool, hot tub or sauna will void the warranty and is potentially hazardous.

13. The equipment is NOT suitable for medical/therapeutic use.

Содержание Acute 3955













Отзывы: