JK Smart BMS JK-B1A8S20P/JK-B2A8S20P User Manual
c)
Discharge
It’s the status of the BMS discharge MOS. When "On" is displayed, it means the BMS
discharge MOS is on and the battery is allowed to discharge; when "Off" is displayed, it
means the BMS discharge MOS is off and the battery is not allowed to discharge.
d)
Balance
It indicates the state of BMS Balance switch. When "On" is displayed, the BMS will balance the
battery automatically when the balance trigger condition is reached; when "Off" is displayed, it means
the balance is off and the BMS will not balance the battery.
e)
Voltage
The voltage displays the total voltage of the battery in real time, and the total voltage is the sum
of all individual cell voltages.
f)
Current
The current shows the total battery current in real time. When the battery is charging, the current is
positive, and when the battery is discharging, the current is negative.
g)
Battery Power
Indicates the real-time power of the battery output or input, and its value is the current battery voltage
multiplied by the current.
h)
Remain Battery
Percentage of remaining battery capacity
i)
Battery Capacity
It’s the actual battery capacity calculated by the BMS. (This value is updated only after the
battery has done a complete discharge and charge cycle).
j)
Remain Capacity
It represents the current remaining capacity of the battery. Unit: AH
k)
Cycle Capacity
Cycle capacity indicates the cumulative discharge capacity of the battery, unit: AH.
l)
Cycle Count
It indicates the number of times the current battery has been charged.
m)
Ave. Cell Volt
It indicates the current single cell average voltage of the battery. Unit: V.
n)
Cell Volt. Diff
It indicates the difference between the highest cell voltage and the lowest cell voltage of the
current whole battery. Unit: V
o)
Balance Curr.
14 /22
, providing you with quality accessories for DIY batteries.
