manualshive.com logo in svg

JK microsystems Flashlite 186, Руководство пользователя

Поделиться
Скачать
JK microsystems Flashlite 186 Скачать руководство пользователя страница 4

JK

 

microsystems

Flashlite 186 

User’s Manual

ii

Limited Warranty

JK microsystems, Inc. warrants each Flashlite 186 to be free from defects in material and
workmanship for a period of 90 days from the date of purchase.  This warranty shall not apply to
any unit which has been subject to misuse, neglect, accident, or abnormal conditions of
operation.

JK microsystems’ obligation under this warranty is limited to repairing or replacing, at JK
microsystems’ option, any unit returned to the factory within 90 days of the date of purchase,
provided that JK microsystems determines that the unit is defective and has been used in
compliance with the terms of this warranty. If the failure has been caused by misuse, neglect,
accident, or abnormal conditions of operation, repairs will be billed at a nominal cost.

The foregoing warranty is exclusive and in lieu of all other warranties, expressed or implied,
including, but not limited to, any warranty of merchantability or fitness for any particular
purpose. JK microsystems shall not be liable for any special, incidental or consequential
damages, whether in contract, tort, or otherwise.

Important Notice

Life Support / Mission Critical Applications

This product is not fault-tolerant and is not designed, manufactured or intended for use or resale
as on-line control equipment in hazardous environments requiring fail-safe performance, such as
in the operation of nuclear facilities, aircraft navigation or communication systems, air traffic
control, direct life support machines, or weapons systems, in which the failure of our hardware or
software could lead directly to death, personal injury, or severe physical or environmental
damage.

Limited Warranty

Содержание Flashlite 186





























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды