Flight
Pre-flight Preparations
1. Connect the remote controller with the drone and then proceed to initial detection.
2. Drone compass calibration.
3. Unlock the drone after the gyro detection of the drone is completed.
4. Pull up the throttle joystick to control the drone to take off, and control the drone flight by left/right joystick.
5. Pull down the throttle joystick to the bottom position and keep for 3 seconds to lock the drone.
6. Pull out the battery from the drone and then turn off the remote controller.
Pic. 1
Pic. 2
Mode
Mode
Mode
●When the battery icon “ ” is shown on the LCD screen, and the drone front lights glow solid on
and the rear lights keep flashing rapidly, it means that the battery is in low voltage.
Low Voltage Warning
●When the battery icon “ ” is shown on the LCD screen, and the drone front lights glow solid on
and the rear lights keep flashing slowly, it means that the battery is nearly low voltage.
Signal Strength Indication
Signal strength “ ” shows the strength of the received signal. The more, the better.
1. The drone and the remote controller are fully charged.
2. The propellers are installed correctly.
3. The motors work normally after unlocking.
Basic Flights
-16-
